Online Store - Old

Order Online for Pick-up In-Store or Delivery

0

Osmo Wood TopOil

OSMO TOPOIL
C$56.00
In stock
1
Product Details
Brand: Osmo

FOOD-SAFE HARDWAX-OIL
Osmo TopOil High Solid is a food-safe Hardwax-oil wood finish designed for Countertops that is extremely tough and hard-wearing. It is water repellent and dirt resistant as well as resistant to wine, beer, cola, coffee, tea, fruit juices, milk and water. These types of liquid spillages will tightly bead on the surface without leaving any marks, simply clean by wiping with a cloth.

  • DIN and EN rated for direct contact with food
  • Ideal for countertops, tabletops, chopping boards, ect.
  • Very durable and hard-wearing – water and chemical resistant
  • Resistant to common liquid spillages such as wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1A
  • Saliva-resistant and sweatproof, suitable for children’s toys
  • Microporous, breathable finish which does not crack, peel or flake
  • Can be spot-repaired and refreshed without sanding
  • Based on renewable raw materials – soybean, sunflower, thistle oil, and carnauba and candelilla wax

SPECIFICATIONS

Approx. Coverage: 24m²/L (258ft2/L) with one coat

Number of Coats: 2 coats: brush, 3-4 coats: cloth

Application Temp: +5°C to 35°C

Approx. Dry Time: 8-10hrs.

Sizes: 5mL, 0.5L

APPLICATION INSTRUCTIONS

By Hand with a Cloth/Rag

Apply three thin coats with a lint-free cloth.

  1. Scrub product into wood using cloth in a circular or figure 8 pattern
  2. Allow roughly 15-minutes for oils to penetrate
  3. Working with the grain, remove all excess product from surface
  4. Allow 8-10 hours drying time before recoating
  5. Apply second and third coats following previous steps

By Hand with a Brush

Apply two thin coats with an Osmo Natural Bristle Brush or similar brush.

  1. With a brush, work product into wood working in all directions, ensuring a thin application
  2. Allow roughly 15-minutes for oils to penetrate
  3. Working the brush with the grain, evenly distribute all product on surface and remove excess
  4. There should be no visible high-build or film – if this is observed, product is over applied
  5. Allow 8-10 hours drying time before recoating
  6. Apply second coat following above procedure
  7. Clean brushes using Osmo Brush Cleaner and Thinner or Turpentine
Save this product for later

Need help with how much to buy? 

Use a paint calculator!

Paint Calculator

Find your perfect colour

using our colour guide.

Colour Guide
Share by: